To Next PageTo Next PageWhat to do if SOMFY Window Blinds don't move?
If your SOMFY window blinds aren't moving, there are a few potential causes. First, the battery might be weak, so try inserting a new one. Another reason could be signal interference from nearby electronics; try turning them off. If these steps don't work, the window covering might not be paired with the device. In this case, you should refer to section 3 'Pairing a Smoove' for instructions.
General| Brand | SOMFY |
|---|---|
| Model | Smoove 1 RTS |
| Category | Window Blinds |
| Language | English |
Details the buttons and indicators for the Smoove 1 RTS remote control.
Details the buttons and indicators for the Smoove 4 RTS remote control.
Describes the mounting frame, Smoove frame, and the Smoove 1 or 4 unit.
Provides a step-by-step guide for installing the Smoove unit onto the wall.
Warning regarding locating the module near metal frames that may impede operation.
Instructions for pairing the Smoove 1 remote with a window covering motor.
Guide to daily operation, creating, and deleting preset positions for Smoove 1.
Instructions for pairing Smoove 4 with multiple window coverings and assigning channels.
Guide to daily operation, creating, and deleting preset positions for Smoove 4.
Step-by-step instructions for replacing the battery in the Smoove remote.
Addresses the cause and solution for the window covering not moving.
Steps to follow when replacing a lost or broken Smoove 1 or 4 controller.
