6.11 Other command devices
Caution
Only use the connection for floating button contacts. External voltage
can damage or destroy the control unit.
Other command devices, e.g., pull-buttons or key switches can also
be connected to the control unit. For installation, please refer to the
instruction manual for the respective device.
6.12 TorMinal
A TorMinal (2) can be connected to connection (1). A TorMinal is a
device for reading out and adjusting factory-set control unit values.
The TorMinal may only be operated by a fully qualified and
appropriately trained technician.
To Next Page
Loading...