SOMMER RDC vision - Page 25

25
DIP3 ON
4
OPEN No reaction No reaction
CLOSE
Operator reverses
for 2 seconds
Door opens fully
DIP4 ON
Intermediate position No reaction Dooropensfully*)
Upper end position for
automatic closing
No reaction
Door closes 5 seconds after
passing through photocell
5.3 Automatic closing after opening via pulse input
Alternative to 7.3 Setting the automatic closing function on page 35
DIP5
OFF Automatic closing function deactivated.
ON
Automatic closing after opening process is activated by pulse input.
Standardvalue=20seconds,canbemodiedusingTorMinal.
5.4 Partial opening function
DIP6
OFF Partialopeningfunctiondeactivated.
ON Partialopeningfunctionactivated.
DIP7
OFF No function
ON No function
5.5 Monitoring of motor run time
DIP8
OFF Monitoring of motor run time deactivated. Dead man mode
ON Monitoring of motor run time activated.