SOMMER RDC vision - Remote Control Safety

5
When using the automatic closing function, ensure compliance with the standard
EN 12453:2000 and install safety device (e.g. photocell).
Only use OEM (Original Equipment Manufacturer) spare parts, accessories, and mounting
material.
The building must have a suitable device or equipment (external safety catch, locking
mechanism) for tubular motors used for a roller door, lift door, sectional door or similar
applications to ensure that if a support or brake fails, a leaf or the whole door will not
dropsuddenly.SeeEN12604.
Operation in connection with a roller grille door is not permissible.
Onlyusetheoperatorinadry,non-hazardousarea.
Comply with all national and local norms.
1.3.1 Remote control
The remote control may only be used for equipment and/or systems where interference
in the transmitter or receiver does not pose a risk to humans, animals or objects, or where
the risk is covered by other safety devices.
The user must be made aware that systems that pose an accident risk should only be
remote-controlled,ifatall,iftheusercanactuallyseethedoor.
The radio remote control may only be used if the movement of the door can be watched
and no persons or objects are within the range of movement.
Keep the handheld transmitter in a safe place to prevent unintended operation e.g., by
children or animals.
The radio system is not protected against interference from other telecommunications
systemsorequipment(e.g.:radio-controlledsystemsthatarelicensedtooperatein
the same frequency range). Excessive interference can be reported to your appropriate
TelecommunicationsOfce,whichhasradiointerferencemeasuring(radiolocation)
equipment.
Do not use handheld transmitters near locations or installations that are sensitive to radio
interference (e.g.: airports, hospitals).