SOMMER RDC vision - Meaning of Blink Codes

57
12.1 Meaning of blink codes
Certain operating modes or faults are displayed with the help of blink codes of the LEDs
and lighting.
This means that the control unit does not have to be opened to make a diagnosis.
12.1.1 Legend
Symbol Meaning of LED or lighting
OFF
ON
__ ...
Flashes 1x, pauses...
__ ...
Flashes 2x, pauses...
etc.
12.1.2 Description
Display Function/feedback Operating mode/fault
Status LED "green"
-Noenergysupply
-FuseF2missingordefective
-Otherhardwareerror
-Hardwareself-testOK
__ ...
-Autoclosingactive
-Programmingmodefortargeted
opening, closing or partial opening
UPLED"yellow"
__ ...
Flashes as long as
the respective direction
of travel is active
-Commissioningmodeactive(DIP8
ON)
Duringnormalmode(DIP8OFF):
-Motorruntimesnotprogrammed
DOWN LED "yellow"
__ ...
Flashes as long as
the respective direction
of travel is active
Commissioningmode(DIP8OFF):
-Normalmodeactive(DIP8=ON)
-Motorruntimesnotprogrammed