4
Save the box and its interior packing material in a
The information below is critically important for warranty
S/N: ___________________________________________
DATE OF SALE:__________________________________
DEALER NAME:_________________________________
CONTACT INFO:_________________________________
For high output applications, provide at least 1U space
The 16-50 and 8-50 were designed to be ultra-simple
detected, the unit will produce sound after approximately
Decide on the appropriate Power Sensing Mode:
Voltage, Audio Signals or the “always on” OFF position
Set the Sense DIP
If using the voltage trigger feature, connect a two-
conductor wire from the 12 volt output of a zone
Connect a pair of RCA cables from the single source
Set the channel Input Assignment DIP switches to
Connect speaker wire from the speakers to their
With the volume on the source turned down to a low,
Follow the steps in the chapter entitled, ‘Protecting
Application Two
Four analog audio sources, such as four music streamers
or four line-level outputs of a multi-zone preamp into the
Decide on the appropriate Power Sensing Mode:
Voltage, Audio SOFF position
ZONE 1 ZONE 2 ZONE 4ZONE 3
Application One
One Analog audio source, such as a music streamer, into
the Bus A inputs for internal distribution to all eight (16-
Figure 1: Single Audio Source
OFF
Set the Sense DIP
If using the voltage trigger feature, connect a two-
conductor wire from the 12 volt output of a zone
Connect a pair of RCA cables from each stereo
Connect 14/4 speaker wire from the remote zones to
With the source volume turned down to a low,
Follow the steps in the chapter entitled, ‘Protecting
To Next Page
Loading...
