To Next PageTo Next Page
Need help?Do you have a question about the Sonance DSP 2-150 MKII and is the answer not in the manual?
Essential safety instructions for installation and operation, covering handling, environment, and maintenance.
Explanation of warning symbols and regulatory compliance statements for safe usage.
Overview of the amplifier and a list of included items for initial setup.
Instructions for safely unpacking the amplifier and guidelines for optimal placement.
Identification of the illuminated power button, indicator LEDs, and volume controls on the front panel.
Identification of rear panel inputs, outputs, and connectors for audio and control signals.
Detailed descriptions of front panel features like power button, LEDs, volume, and auto-on triggers.
Detailed explanations of rear panel inputs, outputs, and connectors.
Details on power consumption and circuit breaker requirements for different operating conditions.
Instructions for connecting primary and secondary audio sources to the amplifier's inputs.
Instructions on connecting speakers, including wire gauge and terminal usage.
Procedure for bridging channels and methods for adjusting output volume.
Explanation of the amplifier's multi-stage protection system and LED indicators for status.
Guidance on installing the amplifier in a rack or stacking multiple units for space efficiency.
Steps to connect the amplifier to the network and access the SonARC homepage.
Guide to the basic setup page for EQ, source, and volume adjustments.
Instructions for assigning input names, sources, and selecting DSP presets for speakers.
Detailed settings for output names, volume levels, and turn-on volume.
Features for identifying the amplifier and configuring IP settings like DHCP and IP address.
Advanced network settings like IP Subnet Mask and amplifier identification mode.
How to back up, restore, or print amplifier settings for configuration management.
Setting up automatic power-on methods and sleep modes for energy saving.
Configuring input names, trim, output names, stereo/mono, group, and bridge mode.
Setting primary and secondary audio sources and their mixing behavior.
Applying and managing EQ presets for optimal audio quality with Sonance speakers.
Tools for assigning, editing, copying, importing, and exporting DSP presets.
Using the built-in pink noise generator for speaker measurements and setup.
Understanding how EQ adjustments affect the amplifier's output frequency response.
Detailed explanation of the 10-band parametric EQ for fine-tuning audio frequency response.
Configuring crossover frequencies, filter types, and output limiting for speaker protection.
Using delay for speaker timing and tilt control for bass/treble adjustments.
Detailed specs on power output, frequency response, THD, SNR, and power consumption.
Information on dimensions, weight, AC voltage, fuse, and rack space requirements.
Guide to LED indicators, DHCP reset, and factory reset procedures.
Comprehensive table detailing auto-on and sleep mode configurations and their behavior.
Solutions for issues related to the amplifier not powering on or passing audio.
Resolving problems with IP control, IR control, and network connectivity.
Diagnosing and resolving issues with individual channel outputs and protection LED activation.
Step-by-step guide to perform a factory reset on the DSP amplifier.
Details of the warranty coverage, period, and conditions for the Sonamp amplifier.
Specific conditions and circumstances not covered by the product warranty.
General
