14
SPECIFICATIONS
SONAMP 8-130 MKII
Number of Channels 8 (4 stereo pairs)
Output Power - 8 ohms (Stereo) 130 Watts RMS per channel (all channels driven)
Output Power - 4 ohms (Stereo) 145 Watts RMS per channel (all channels driven)
Output Power - 8 ohms (Bridged) 300 Watts
Frequency Response 5Hz – 50kHz (bandwidth limited)
Total Harmonic Distortion 0.15% (1kHz, 8 ohms) 0.1% (1kHz, 4 ohms)
Signal to Noise Ratio –100dB (20Hz-20kHz)
Input Gain 29dB
Input Sensitivity 100mV for 1 Watt Output @8 ohms
1140mV for 130 Watts Output @8 ohms
Input Impedance 20k ohms
Loop Output Impedance 600 ohms
Maximum Source Input Voltage 2.9V VAC RMS
Communication Protocol TCP/IP (RJ-45 10/100 Base T)
Power Consumption 120V AC
@8 ohms (sinewave, full power) 1160 Watts (all channels driven)
@4 ohms (sinewave, full power) 1512 Watts (all channels driven)
@8 ohms (sinewave, 1/8 power) 181 Watts (all channels driven)
@4 ohms (sinewave, 1/8 power) 226 Watts (all channels driven)
@idle 35 Watts
Sleep Mode 1.1 Watts
Voltage or Audio Green 0.45 Watts
Power Consumption 220V AC
@8 ohms (sinewave, full power) 1097 Watts (all channels driven)
@4 ohms (sinewave, full power) 1440 Watts (all channels driven)
@8 ohms (sinewave, 1/8 power) 182 Watts (all channels driven)
@4 ohms (sinewave, 1/8 power) 219 Watts (all channels driven)
@idle 31 Watts
Sleep Mode 1.2 Watts
Voltage or Audio Green 0.48 Watts
Heat Output
@8 ohms (sinewave, full power) 737 BTU (all channels driven)
@4 ohms (sinewave, full power) 1365 BTU (all channels driven)
@8 ohms (sinewave, 1/8 power) 215 BTU (all channels driven)
@4 ohms (sinewave, 1/8 power) 303 BTU (all channels driven)
AC Voltage 100-120V@60Hz, 220-240V@50Hz
AC Fuse 10A (T10AL ~ 250V)
Rack Space Requirement 1U
Dimensions w/ Feet (W x H x D) 17 1/4” x 2 1/8” x 16 13/16” (438mm x 54mm x 427mm)
Dimensions w/ Rack Ears w/o Feet (W x H x D) 19” x 1 3/4” x 16 13/16” (482mm x 44mm x 427mm)
Shipping Weight 18 lbs (8.2kg)
CAD Files available for download at www.sonance.com/electronics/amplifiers/dsp
To Next Page
Loading...
