SONARRAY SR1 SYSTEM INSTRUCTION MANUAL
Recommended tools you will need
1. Wire Strippers that will accommodate up to
12 gauge wire.
3. Wire Ties
2. Round Cable Stripper
(Needed when using 14/4 direct burial wire.)
Satellite Wire Connection
Connecting the speakers using 14/4 direct burial
speaker wire.
1. Pull the 14/4 wire on the spool to the furthest speaker location.
Leave the wire attached to the spool until the last speaker has
been connected.
2. Starting at the first speaker and every speaker that follows,
create a loop of wire approximately 6” in length.
3. Use the Round Cable Stripper to remove the outside protective
wire jacket to expose the 4 individual color-coded wires.
If you are unfamiliar with using a Round Cable Stripper, please
go to YouTube and search for videos on ‘Using a Round Cable
Stripper’. Or, visit the specific brand of Cable Stripper’s
company website for detailed instructions.
4
To Next Page
Loading...
