Sonel PAT-800 - Automatic Tests

OPERATING MANUAL PAT-800/805 version 1.09
38
Additional information displayed by the meter
Lack of continuity in conductor L.
Lack of continuity in conductor N.
L and N are shorted.
L and N are replaced.
4.12 Automatic tests
Press AUTO. The screen with test selection
will be displayed (1 ... 20), the number of test
blinks.
Notes:
- Only numbers of programmed tests are displayed
- If no test is programmed, after pressing AUTO the meter immediately enters the set-up mode
( is displayed).
- Programmed test is a test where at least for one class, one measurement is performed (set on
).
- Default programmed tests are: 1 ... 4 for all three classes.