12. You can now ghten all 4 tail boom clamps.
a. Important! Make sure you have proper alignment by measuring the
boom lengths and looking at the main wing/tail from different angles.
b. Important! If the surfaces are skewed in relaonship to the main wing, it
can negavely affect flight characteriscs.
13. Locate prop adapter, propeller, and adapter rings. Install onto motor sha and
ghten completely.
a. It is always best to balance the propeller before flying.
b. Note proper direcon. The “leers” printed on the prop always face the
front.
c. Also ensure that motor screws are fully seated from the factory.
Page | 10
To Next Page
Loading...