Thank you for purchasing the SONICMODELL Mini Skyhunter V2!
It is important to read the manual in its
en
ety before your maiden flight. This model is intended
to be a short to
medium range FPV
aircr
, but it can be lots of fun for line of sight as well
.
The Mini Sky Hunter V2 is easy to operate
with excellent flight characteris
s, but we do not
unless
helped by
an experienced pilot .
Please obey all current laws and use common sense
for
safety
when
oper
g
.
Most importantly, have fun!
Note: We reserve the right to modify infor
presented and cannot be held liable for errors
within.
Required to operate:
Required for assembly:
Contact Cement, Medium CA, or personal choice of glue
Blue thread lock
Small Phillips screw driver
3mm hex tool
Hobby Knife
Servo Centering Tool
recommend it as a beginner airframe for FPV
Page | 2
Motor – 2217 1250KV (Included in PNP)
Propeller – 8x4E (Included in PNP)
ESC – 40A w/ 5V 3A BEC (Included in PNP)
Servos – 9gx3pcs (Included in PNP)
Ba ery – 2200-5000mah 3s-4s (May vary depending on addional gear)
�
To Next Page
Loading...