70
About Start-up Handling Options Tinnitus Warnings More info
Technical information
The hearing aid contains the following two
radio technologies:
The hearing aid contains a radio transceiver
using short range magnetic induction
technology operating at 3.84 MHz. The
magnetic field strength of the transmitter is
very weak and always below 15 nW (typically
below –40 dBμA/m (–12.20 dBμA/ft) at
10 meters (33 feet) distance).
The hearing aid also contains a radio
transceiver using Bluetooth Low Energy
(BLE) and a proprietary short-range radio
technology, both operating at ISM band
2.4 GHz. The radio transmitter is weak and
always below 9 mW equal to 9.6 dBm in total
radiated power.
The hearing aid complies with international
standards concerning electromagnetic
compatibility and human exposure. Only use
your hearing aid in areas where wireless
transmission is permitted.
Due to the limited space available on the
hearing aid, relevant approval markings can be
found in this booklet. Additional information
can be found in the Specification Guide on
www.sonici.comcom
USA and Canada
This device contains a radio module
(DA AU5 MNR R) with the following
certification ID numbers:
FCC ID: 2ACAHAU5MRTRC
IC: 11936A-AU5MRTRC
To Next Page
Loading...
Need help?
General
