Cleaning the Vent
The vent cleaning tool is designed to remove cerumen
(earwax) from the vent in your hearing aid. We
recommend that you clean your hearing aid in the
morning. This allows cerumen to dry overnight and to
be more easily removed from the aid.
Hold the aid in your hand with the end containing 1.
the battery door facing you.
Insert the thin plastic filament on the cleaning tool 2.
into the vent tube. (see figure 1)
Push the thin filament all the way through the vent 3.
tube to the opening on the other end.
Wipe off any cerumen that has accumulated on the 4.
tool with a tissue before pulling the filament out of
the vent tube.
Important
Do not insert the cleaning tool into any other opening
on the hearing aid. This will damage the microphone
and/or receiver in the hearing aid and void all
warranties.
To Next Page
Loading...
