SonicWALL SMA - Page 36

SonicWallSMAConnectTunnel12.0DeploymentPlanningGuide
CommonVPNConfigurations
36
2Click New: the Configure Community page appears.
3EnteranameforthecommunityintheNamefield.Forexample,Employees.
4Toaddusersasmembersofthecommunity,clickEdit.TheUsersandGroupsdialogisdisplayed.
5 Selectthecheckboxnexttotwooftheusersyouadded.
6 ClickSave.TheUsersandGroupsdialogclosesand
theusersarenowdisplayedintheMemberslist.
7 ClickNexttoconfiguretheaccessmethodsallowedfortheEmployeescommunity.
SpecifyingAccessMethodsforEmployees
Foreachcommunityofusers,youcanconfigurewhichaccessmethodsareavailable:SmartTunnelAccess(IP
Protocol),Web‐basedproxyaccess(TCPProtocol),orWebaccess(HTTP).
FortheEmployeescommunity,it’slikelythatyouwillwanttograntopenaccesssothatausercanestablish
remoteaccessusing
whatevermethodisappropriateforhisorherdevice.Bycontrast,thePartnerscommunity,
inthisexample,willhaveonlyWebaccess.
Thetunnelclientsgiveusersan“in‐office”experience,withfullVPNaccesstotheirapplications.Inthefollowing
stepsyou’llgrantEmployeestheabilitytouseOnDemandTunnel,
andsetupanIPaddresspoolfortheclient.
Tospecifyopen,tunnelaccessforemployees:
1IntheTunnel(IPProtocol)section,selecttheNetworktunnelclientcheckbox.Ifyoudon’thaveanIP
addresspoolconfiguredyet,awarningisdisplayed: