Clock Synchronization with External Devices
CLOCK
SOURCE
INTERNAL：
Use the built in clock. The Lo-12 XT will
operate as the master when used by itself
or synchronizing other devices.
M I D I：
The Lo-12 XT will synchronize with MIDI
clock received through the MIDI IN.
S Y N C：
The Lo-12 XT will synchronize with clock
signals received through the SYNC IN.
TEMPO LED
The LED will light along with the
synchronized tempo.
When set to OFF, the LED will also stop
blinking during normal playback.
POLARITY IN
This switches the polarity of the SYNC IN
jack between RISE (+ / waveform rising)
and FALL ( − / waveform falling). Set this
to match the sync polarity of the connected
device.
POLARITY OUT
This switches the polarity of the SYNC
OUT jack between RISE (+ / waveform
rising) and FALL ( − / waveform falling).
Set this to match the sync polarity of the
connected device.
130
To Next Page
Loading...
