Sonicware LoFi-12 XT - Sample Tagging and Database Update

Sample File Setup - Loading into Sample Slots -
Tagging samples
Lo-12 XT can set to 15 TAGs for a sample.
By setting TAG, you can quickly access the samples you want to use.
1
Push the C knob to enter TAG EDIT mode.
2
Select the sample and press 15PADs to add TAG.
Pads of the set TAGs are lit green (except for the Favorites)
3
Push the C knob to save the TAG.
To cancel the Tagging, press the
CLR
button.
• TAG information is stored in the audio le.
52