Sonicware LoFi-12 XT - Clearing Parameter Locks

Parameter Locking - Direct input
Clearing parameter lock information
1
Press
CLR
＋ STEP (lit orange) for which parameter lock has been
input.
• STEPs to which both NOTE and parameter lock information
are input are lit yellow.
If you only want to delete the parameter lock, you can press
func
+ STEP and delete it from the STEP DATA menu.
For details on the STEP DATA menu( → P.100)
Clearing any of the parameter lock information
at once
1
While holding down
CLR
, press the A - D knob you want to clear
the parameter lock. All applicable parameter lock information for
the track will be cleared.
98