64
Connectivity
Receiving Data via Bluetooth
To receive data using Bluetooth, your device should be
Bluetooth activated and must be visible to other devices.
1. When you receive a data, you are asked if you want
to accept it.
2. Select Accept to receive data OR select Reject to
refuse the data.
3. If you accept, the data will be stored in My files >
Images or Audio or Others.
Data Account
You can set the Network account and view the GPRS
information.
To set the network prole, select Menu > Connectivity >
Data account and create a new data account.
GPRS: You can create, edit and delete the accounts.
You can edit the following information in the accounts:
Account name, APN, User name, Password and Authority
type, Primary DNS and Secondary DNS. Make the
changes and select Save.
USB Function
The USB cable of the phone can be used as a mass
storage device. When the phone is connected to the
computer via a USB cable, the following two options are
displayed:
• Mass storage: Select this to use the USB cable as
mass storage device to transfer and synchronize
data between the Sonim XP3300 FORCE phone and
your computer.
• COM port: Select this to use the phone with
PC-Sync software.
When the phone is connected to the computer
via USB cable, you can select only to charge
the phone by pressing the Back button. You
need not select the Mass storage or COM port
option.
When the phone is connected to the computer
via USB cable and the SD Card is also present
in the phone, the SD card and the phone
memory are displayed as two separate drives
in the computer.
When the phone is connected to the computer
via USB cable, you cannot access the My les
menu in the phone. To access the My les
menu, disconnect the USB cable.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
