Sonnenkonig FRESCO 100

Questions and Answers

X
xrodriguezAug 12, 2025
Why is my Sonnenkonig FRESCO 100 not cooling enough?
- A
  Andrew AlexanderAug 12, 2025
  If your Sonnenkonig Air Conditioner isn't cooling sufficiently, several factors could be at play. First, ensure all doors and windows are closed to prevent outside air from interfering with the cooling process. Also, remove any heat sources from the room that might be contributing to the issue. Check the exhaust hose for any blockages or disconnections and clean or reconnect it as necessary. Verify that the set temperature isn't too high and readjust it to a cooler setting. Finally, inspect the air inlet opening for any obstructions and clear them to ensure proper airflow.
C
cathysmithAug 16, 2025
What does E2 code mean on my Sonnenkonig FRESCO 100 Air Conditioner?
- J
  julie21Aug 16, 2025
  If your Sonnenkonig Air Conditioner displays an 'E2' error code, it indicates that the water tank is full. You should empty the water tank to resolve this issue.
R
Robert RodriguezAug 20, 2025
What does E0 code mean on my Sonnenkonig FRESCO 100 Air Conditioner?
- T
  Traci GregoryAug 20, 2025
  If your Sonnenkonig Air Conditioner displays an 'E0' error code, it means the ambient temperature sensor is malfunctioning. You should replace the temperature sensor, but the air conditioner will still function.
A
Amy DixonAug 23, 2025
Why is my Sonnenkonig FRESCO 100 Air Conditioner not cool enough?
- G
  gene89Aug 23, 2025
  Your Sonnenkonig Air Conditioner might not be cooling effectively due to several reasons: ensure all doors and windows are closed, remove any heat sources from the room, check that the exhaust air hose is properly connected and not blocked, verify that the temperature setting isn't too high, and ensure the air inlet is clean and not obstructed. Address these issues to improve cooling performance.
D
derekkelleyAug 27, 2025
What to do if Sonnenkonig FRESCO 100 Air Conditioner does not start?
- J
  Juan FloresAug 27, 2025
  If your Sonnenkonig Air Conditioner isn't starting, check if the water full indicator lamp is blinking, indicating a full water tank, and empty it. Also, ensure the room temperature is not lower than the set temperature in cooling mode; if it is, reset the temperature.
J
Jessica MunozAug 30, 2025
What does error code E2 mean on my Sonnenkonig Air Conditioner?
- D
  David BurtonAug 31, 2025
  Error code E2 on your Sonnenkonig Air Conditioner indicates that the water tank is full. Please empty the water tank to resolve this issue.
J
Joseph FisherSep 4, 2025
Why is my Sonnenkonig FRESCO 100 Air Conditioner so noisy?
- B
  Brad YoungSep 4, 2025
  The noise from your Sonnenkonig Air Conditioner could be due to a couple of reasons. First, check if the unit is placed on a flat, level surface. If not, reposition it. Also, the sound might be from the refrigerant flowing inside, which is normal.
A
Amy JohnsonSep 7, 2025
What does code E0 mean on a Sonnenkonig FRESCO 100?
- M
  Mary MartinezSep 7, 2025
  Code E0 on your Sonnenkonig Air Conditioner indicates that the room temperature sensor has failed. You can replace the sensor, but the device can still function without it.