Sonnenkonig FRESCO 140 User Manual (English)

Questions and Answers:

S
scrossAug 8, 2025
Why is my Sonnenkonig FRESCO 140 not cool enough?
- J
  Julia GainesAug 9, 2025
  If your Sonnenkonig Air Conditioner isn't cooling sufficiently, ensure all doors and windows are properly closed to prevent warm air from entering. Remove any heat sources from the room that may be affecting the temperature. Check the exhaust air hose to confirm it is correctly connected and free from obstructions. Adjust the temperature setting to a cooler level. Lastly, inspect the air inlet and clean it if you notice any blockage.
B
Bradley WilsonAug 13, 2025
What to do if my Sonnenkonig Air Conditioner shows code E2?
- K
  kaitlyn21Aug 13, 2025
  If your Sonnenkonig Air Conditioner displays code E2, it indicates that the water tank is full. You should empty the water tank.
R
Richard JenkinsAug 18, 2025
Why my Sonnenkonig FRESCO 140 does not start?
- A
  Ashley HopkinsAug 19, 2025
  If your Sonnenkonig Air Conditioner fails to start when you press the power button, it could be due to a couple of reasons. First, check if the water full indicator is blinking, which means the water tank is full and needs to be emptied. Another reason might be that the room temperature is lower than the set temperature in cooling mode; in this case, reset the temperature.
M
Mrs. Sarah CohenAug 23, 2025
What does code E0 mean on my Sonnenkonig FRESCO 140 Air Conditioner?
- A
  Andrea LunaAug 25, 2025
  If your Sonnenkonig Air Conditioner displays code E0, this indicates that the room temperature sensor has failed. You should replace the room temperature sensor. Note that the device can still function without replacing the sensor.
C
christopher90Aug 29, 2025
Why is my Sonnenkonig Air Conditioner making noise?
- J
  Julia MitchellAug 29, 2025
  If your Sonnenkonig Air Conditioner is making unusual noise, ensure it is placed on a surface that is as flat and level as possible. The sound might also be the normal sound of the refrigerant flowing inside the air conditioner.
D
deborah11Sep 2, 2025
What does code E3 mean on a Sonnenkonig FRESCO 140 Air Conditioner?
- J
  jwilliamsSep 2, 2025
  If your Sonnenkonig Air Conditioner displays code E3, it means the evaporator temperature sensor has failed. Replace the evaporator temperature sensor.