Need help?Do you have a question about the Sonnenkraft DHW 400 PR2 and is the answer not in the manual?
General| Brand | Sonnenkraft |
|---|---|
| Model | DHW 400 PR2 |
| Category | Water Heater |
| Language | English |
Read installation and commissioning instructions carefully to prevent damage and ensure correct use of the device.
Observe generally approved rules of technology and specific technical regulations like EN and DIN standards.
Tank must be assembled and installed by a certified specialist company in a frost-proof room.
Diagram illustrating the connections for cold water, warm water, circulation, and solar systems.
Install an expansion vessel with a flow-through fitting to equalize pressure fluctuations.
Details on cold water connection requirements according to DIN 1988, listing components A through H.
Step-by-step instructions for applying the CFC-free fleece insulation with foil jacket and zip fastener.
Procedure for initial filling, commissioning, testing for watertightness, and recommended annual servicing.
Guidance on testing and replacing the magnesium anode by customer service after 2 years, then annually.
Electrical elements must be connected by certified installers; observe country-specific regulations and descale annually.
Manufacturer guarantees storage tank enameling and rust-proofness for 5 years, provided the magnesium anode is maintained.
Detailed specifications for all system connections, including types, sizes, and materials.
ErP data for the storage tank, including storage volume, standing loss, and energy efficiency class.
To Next Page
