Do you have a question about the Sonnenkraft DHW Compact Series and is the answer not in the manual?
Voltage | 230V |
---|---|
Capacity | 100L, 150L |
Pressure | 6 bar |
Dimensions (Height x Diameter) | Varies by model |
Weight | Varies by model |
The tank must be assembled and installed by a certified specialist company. Follow all guidelines carefully.
Illustrates the plumbing connections for the unit, including cold water, warm water, and solar circuits.
Recommends installing an expansion vessel to equalize pressure fluctuations and avoid water loss.
Details on cold water connection requirements according to DIN 1988, specifying necessary components.
Step-by-step instructions for assembling the CFC-free fleece insulation with foil jacket and zip fastener.
Checks required before commissioning, including water supply, tank filling, and system testing by specialists.
Guidance on testing and replacing the magnesium anode as per DIN 4753 requirements.
Requirements for connecting electrical heating elements by certified installers, following country-specific regulations.
Details the manufacturer's warranty for the storage tank enameling and rust-proofness, and for spare parts.
Presents technical data including article numbers, capacities, dimensions, and weights for different DHW models.
Specifies operating pressures and temperatures for drinking water, solar circuits, and heating systems.
Details the heating surface areas for solar and heating registers, and the content of heat exchangers.
Provides performance data such as NL ratings, standby power, and energy efficiency class.
Lists connection types and sizes for cold water, hot water, circulation, solar forward/return flows, and sensors.
Specifies connection types and sizes for heater forward and return flows, and sensor immersion sleeves.
Provides dimensions for the anode and inspection flange, crucial for maintenance and installation.
Details ErP data including storage volume, standing loss, pump power consumption, and standby power.