1 Fusion R400 RAID USB 3.0 Features 1
2 Drive Installation and Enclosure Setup 2
Install Drives
Connect the Fusion R400 RAID USB 3.0 to Computer and Power Outlet
3 Drive Mode Descriptions 3
RAID 0: Striping, No Redundancy
RAID 10: Striping, Mirror Spans Two Drives
Span: Concatenation, Volume Spans Four Drives
RAID 5: Striping, Parity Distributed Among Drives
JBOD: Just a Bunch of Disks
4 Drive Mode Configuration Instructions 5
General Information
Select Drive Mode
5 Drive Formatting Instructions 6
OS X Users’ Instructions
Windows 8/7/Vista and Server 2012/2008 Users’ Instructions
Linux Users’ Information
6 Status LED Indications 7
System Powered, No Data Reads or Writes
Drive Activity
Drive Not Recognized
RAID 5 or RAID 10 Rebuild
Bad Drive Detected
7 Specifications, Warnings, and Additional Information 8
Specifications
Safety Precautions
Warnings
FCC Compliance
Contacting Customer Serrvice
Visit Our Website
Contents
To Next Page
Loading...