EasyManua.ls Logo

Sonoff 4CH Pro - Electrical Characteristics; Wiring Instruction

Sonoff 4CH Pro
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sonoff 4CH PRO data JAN 2018
Features
● Support independently turn on/off 4 home appliances
● Support to turn on/off home appliances by local toggle buttons
● Support tracking device status and remote control through APP
● Support control by 433MHz remote indoor
● Support switching among self-locking mode, inching mode and interlock mode
● Support countdown timer and scheduled timer
● Support share control
Electrical Characteristics
● Voltage range: 90-250v AC(50/60Hz) /5-24v DC
● Max current: 10A/chnl
● Max Power: 2200W/chnl
● Wireless Frequency: 2.4Ghz
● Operating Temperature(recommended): 0ºC-40ºC(32°F-104°F)
● Operating Humidity: 5%-90%RH, Non-condensing
● Max soldering temperature: 260℃
Wiring Instruction
L-In: Input LIVE
To enter into WiFi pairing state, you should press and hold one of CH1, CH2, CH3, CH4 buttons until the
WiFi LED blinks 3 times repeatedly.
L1,L2,L3,L4 port respectively connects to LIVE of CH1, CH2, CH3, CH4.
You can randomly connects to any of the five N port and 5 GND port for your devices.
WIFI Characteristics
• 802.11 b/g/n
• Built-in 10-bit high accuracy ADC
• Built-in TCP/IP protocol stack
• Built-in TR switch, balun, LNA, power amplifier and matching network
• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm
output power
• A-MPDU&A-MSDU aggregation and 0.4μs guard interval
1