Need help?Do you have a question about the Sonoff B02 and is the answer not in the manual?
General| Type | Smart Bulb |
|---|---|
| Category | Lighting Equipment |
| Wattage | 9W |
| Connectivity | Wi-Fi |
| Control Method | App, Voice Control |
| Base Type | E27 |
| Luminous Flux | 806 lm |
| Color Temperature | 2700K-6500K |
| Wireless Standard | IEEE 802.11 b/g/n 2.4GHz |
| Dimmable | Yes |
| Wireless Protocol | Wi-Fi |
| Compatibility | Amazon Alexa, Google Assistant |
| Voltage | 220-240V |
| Light Color | RGB |
| Operating Temperature | -10°C to 40°C |
| Dimensions | 60mm x 119mm |
Instructions for installing the Wi-Fi smart LED bulb, including safety precautions for electrical shock.
Guide on downloading and installing the eWeLink application for device control on smartphones.
Steps to power on the device and its initial pairing mode (breathing mode) for setup.
Procedure for adding the device using the Quick Pairing method via the eWeLink app.
Alternative method for adding the device when Quick Pairing fails, using specific switch sequences.
Describes the bulb's behavior when not actively paired, entering a default warm light state.
Instructions for resetting the device to factory defaults, often by repeated switch presses.
Troubleshooting common issues like device 'Offline' status and Wi-Fi connectivity.
To Next Page
