*Please install and maintain the device by a professional electrician. To avoid electric shock
hazard, do not operate any connection or contact the terminal connector while the device is
powered on!
2.
Wiring instruction
To ensure the safety of your electrical installation, it's essential either a Miniature Circuit Breaker
(MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 10A
has been installed before the BASICR4.
Wiring: 16-18AWG SOL/STR copper conductor only, Tightening torque: 3.5 lb-in
To Next Page
Loading...
