To Next PageTo Next Page
Need help?Do you have a question about the Sonoff BASICR4 and is the answer not in the manual?
General| Model | BASICR4 |
|---|---|
| Type | Smart Switch |
| Max Load | 10A |
| Wireless Connectivity | Wi-Fi |
| App Compatibility | eWeLink |
| MCU | ESP8266 |
| Operating Humidity | 5% to 90% RH |
| Casing Material | PC V0 |
| Certification | CE, FCC, RoHS |
| Power Supply | 100-240V AC, 50/60Hz |
| Input | 100-240V~50/60Hz 10A Max |
| Output | 100-240V~50/60Hz 10A Max |
| Wi-Fi | IEEE 802.11 b/g/n |
| Operating Temperature | -20°C to 40°C |
Describes the physical button functions and the status indications of the Wi-Fi LED.
Details the connection terminals and the protective cover for safety.
Lists voice assistants like Google Home and Alexa supported by the device.
Comprehensive list of technical parameters including MCU, input/output, connectivity, and dimensions.
Initial steps for installation, starting with ensuring the power is off.
Detailed guide for connecting wires, including safety precautions and conductor specifications.
Steps to follow to safely power on the device after wiring is complete.
Instructions to download the necessary eWeLink mobile application.
Step-by-step guide for pairing the device with the app via scanning or manual addition.
How to enable a mode where the device remains online when the wall switch is off.
Explanation of the built-in sensor that prevents overheating by cutting off the load.
Guide to changing the device's Wi-Fi network configuration.
Procedure to restore the device to its default factory settings.
Answers to common questions and solutions for pairing failures.
Information on FCC compliance, operation conditions, and interference.
Details Canadian ISED compliance and operating conditions.
Safety guidelines on RF exposure (SAR) and environmental disposal (WEEE).
Official statement of compliance with EU Radio Equipment Directive.
Specifies operating frequency ranges and output power for Wi-Fi and BLE.
