Need help?Do you have a question about the Sonoff D1 and is the answer not in the manual?
General| Model | Sonoff D1 |
|---|---|
| Category | Switch |
| Input Voltage | 100-240V AC 50/60Hz |
| Output | 100-240V AC 50/60Hz |
| Dimming Range | 1%-100% |
| Operating Temperature | -10°C to 40°C |
| Operating Humidity | 5%-95% RH, non-condensing |
| Casing Material | PC V0 |
| MCU | ESP8266 |
| Certification | CE, FCC |
| Wireless Standard | 802.11 b/g/n |
| Control | App, RF Remote, Voice Control |
Procedure for powering off the device before installation or maintenance.
Detailed steps and diagrams for connecting the device's wires.
Instructions on downloading and installing the eWeLink mobile application.
Steps for powering on the device and entering quick pairing mode.
Guide on adding the device to the eWeLink app via quick pairing.
Instructions for pairing the dimmer switch with the RM433 remote controller.
Procedure to reset the device to factory default settings.
Changes or modifications not expressly approved may void user authority.
Equipment complies with FCC radiation exposure limits for uncontrolled environments.
To Next Page