Sonoff BASICZBR3 - App and Device Setup; Download APP; Power On and Pairing

4
One live wire wiring instruction:
Make sure the neutral wire and live wire connection is correct
Download APP
Android™ & iOS
Power on
After powering on, the device will enter the pairing mode during the first use and the
ZigBee LED signal indicator flashes.
The device will exit the pairing mode if there is no next operation for a long time. If
enter again, please long press the pairing button for 5s until the ZigBee LED signal
indicator flashes and releases.
L Out
L output N
N input L
N In
L In
L output N
N input L