9
Mount the device on the guide rail inside the distribution box. If the box is made of
metal, it is recommended to place the antenna externally for optimal signal strength.
Note: Avoid placing the antenna and current transformer near high-voltage busbars or
sharp edges to prevent damage.
Circuit Breaker Requirement: A suitable circuit breaker must be installed as a
disconnect switch to provide safety during maintenance. The circuit breaker should be
placed in an accessible and visible location for easy access.
Add Device
Download the eWeLink App
Download the eWeLink app from the Google Play Store or Apple App Store.
Add Device
Follow these steps to add your device:
• Step 1: Open the app, select "Add Device," and choose the "Scan" option.
• Step 2: Scan the QR code found on the back of the quick guide or the device.
• Step 3: Select "Add Device" to begin.
• Step 4: Power on the device by turning on the circuit breaker.
• Step 5: Long press the button on the device for 5 seconds to enter pairing mode.
• Step 6: Confirm the Wi-Fi LED indicator flashes (two short flashes followed by one
long flash).
• Step 7: Search for the device in the app and start the connection process.
• Step 8: Select the appropriate "Wi-Fi" network and enter the password.
• Step 9: Wait for the device to be successfully added. A confirmation message will
be displayed once completed.
To Next Page
Loading...
