Sonoff S26R2ZB User Manual

SONOFF TECHNOLOGIES CO., LTD.
English
8
Product Introduction
Pairing button/Manual switch
ZigBee LED signal indicator (Green)
On/Off LED indicator (Red)
Features
Above functions are determined by the connected ZigBee Hub.
Remote Control Single/Countdown Timing Voice Control
Smart Scene
Share Control
Switch Network
If you need to change the network, long press the pairing button for 5s until the
ZigBee LED signal indicator flashes and release, then the device enters pairing mode
and you can pair again.
Deleting the device on the eWeLink app indicates you restore it to factory setting.
Factory Reset
Camera Binding
The is a smart device with ZigBee wireless communication protocol that allows you
to remotely turn on, schedule on/off and set smart scenes to trrigger other devices,
etc.

Sonoff S26R2ZB Specifications

General

Brand	Sonoff
Model	S26R2ZB
Category	Home Automation
Language	English