Off
On
Off
On
The "RS-485 Termination Resistor Switch" of the slave unit is off by default. To make sure stable
communication, the "RS-485 Termination Resistor Switch" of the terminal slave unit shall be
turned on.
3. Download the eWeLink App
4.Power on
After powering on, the device will enter the Bluetooth Pairing Mode during the first use. The
Signal Indicator flashes quickly.
The device will exit the Bluetooth Pairing Mode if not paired within 3mins. If you want to enter
this mode again, please long press the pairing button for about 5s until the Signal Indicator
flashes quickly and release.
eWeLink
eWeLink
Android™ & iOS
Shenzhen Sonoff Technologies Co., Ltd.
English
13
To Next Page
Loading...
Need help?
General