Sonoff ZBBridge User Manual

Currently supported ZigBee sub-devices
The number of supported ZigBee sub-devices will continue to be increased.
The device also supports other ZigBee standard protocol products types, such
as wireless door/window sensor, motion sensor, one-gang smart switch, water
sensor and temperature & humidity sensor.
SONOFF
eWeLink
BASICZBR3 ZBMINI S31 Lite zb
SNZB-01 SNZB-02 SNZB-03
SNZB-04 S26R2ZB (TPE/TPG/TPF)
SA-003-UK
SA-003-US
Brands
Model
Users can delete the single sub-device on eWeLink APP.
Delete ZigBee sub-devices
Long press the pairing button for 10s until ZigBee LED signal indicator "flashes twice",
then all paired sub-devices have been deleted.
Long press the pairing button for about 5s until the Wi-Fi LED indicator changes in a
cycle of two short and one long flash and release, then the reset is successful. The
device enters quick pairing mode (Touch).
Factory Reset
Please reset the device to factory defaults if you want to change the Wi-Fi network,
then reconnect the new network.

Sonoff ZBBridge Specifications

General

Brand	Sonoff
Model	ZBBridge
Category	Wireless Access Point
Language	English