2 Bluetooth button Pair a new device:
1. Turn on Bluetooth in your
device's settings.
2. Press and hold until (about 2
seconds) you hear a tone and the
status light blinks blue.
3. Go to the device’s Bluetooth
settings and select Arc Ultra
from the list.
When your Arc Ultra successfully
connects to Bluetooth, the status
light will show solid blue.
3 Ethernet port Use an Ethernet cable if you want to
connect to a router, computer, or
network-attached storage (NAS)
device (optional).
4 Microphone switch Toggle to turn all product
microphones on or off.
Note: To use voice services, both the
microphone switch and the voice
services indicator light must be on.
When the switch is off (down), the
microphones are disabled so
microphone-enabled features like
Trueplay quick tuning and voice
services are unavailable.
When the switch is on (up),
microphone-enabled features are
available.
To Next Page
Loading...
