Need help?Do you have a question about the Sonos CONNECT:AMP and is the answer not in the manual?
General| Audio decoders | Dolby Digital |
|---|---|
| Amplifier class | D |
| Frequency range | 22 - 20000 Hz |
| RMS rated power | 110 W |
| Built-in crossover | Yes |
| Crossover frequency | 80 Hz |
| Audio output channels | 2.1 channels |
| Peak power per channel | 55 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.02 % |
| Purpose | Home |
| Material | Aluminum |
| Product color | White |
| Connectivity technology | Wired |
| Audio (L/R) out | 2 |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Speakers connectivity type | Banana connector/Binding posts |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| AC input voltage | 110-240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 207 mm |
|---|---|
| Width | 185 mm |
| Height | 89 mm |
| Weight | 2300 g |
Connect Sonos CONNECT or CONNECT:AMP to your router via Ethernet or use a Sonos BRIDGE wirelessly.
Place additional Sonos components in desired rooms and apply power.
Download the Sonos Controller App for Mac/PC or mobile devices and follow setup prompts.
Select music from the Sonos Controller app, including radio, music services, and music library.
Provides Sonos website, email, and technical support phone numbers for further assistance.
To Next Page
