Sonos CONNECT:AMP User Manual

CONNECT…
 THE SONOS CONNECT OR CONNECT:AMP TO YOUR ROUTER WITH AN ETHERNET CABLE, OR
 A SONOS BRIDGE TO YOUR ROUTER IF YOU PREFER TO USE THE SONOS CONNECT OR
CONNECT:AMP WIRELESSLY
A
Note: Please refer step 2 for how to connect it to your home audio system.
B
PLACE ADDITIONAL SONOS COMPONENTS IN THE ROOMS
OF YOUR CHOICE AND APPLY POWER OPTIONAL
YOU WILL BE PROMPTED TO ADD THEM TO YOUR SONOS SYSTEM IN STEP 3.
BRIDGEROUTER CONNECTROUTER CONNECT
A B
OR
If adding a CONNECT:AMP,
attach desired speakers.
If adding a CONNECT, connect the
‘audio out’ to ’audio in’ on your
receiver or amplifier.

Sonos CONNECT:AMP Specifications

General

Audio decoders	Dolby Digital
Amplifier class	D
Frequency range	22 - 20000 Hz
RMS rated power	110 W
Built-in crossover	Yes
Crossover frequency	80 Hz
Audio output channels	2.1 channels
Peak power per channel	55 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.02 %
Purpose	Home
Material	Aluminum
Product color	White
Connectivity technology	Wired
Audio (L/R) out	2
Headphone outputs	1
Headphone connectivity	3.5 mm
Speakers connectivity type	Banana connector/Binding posts
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	207 mm
Width	185 mm
Height	89 mm
Weight	2300 g