Important safety information
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry soft cloth. Household cleaners or solvents can damage the finish on
your Sonos products.
Sonos products with rubber rings on the bottom, such as Move, Move 2, One, and One
SL, may leave a faint ring on some surfaces treated with polyurethane. This ring can be
easily removed by wiping with a damp cloth.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
7. Do not expose batteries (battery pack or batteries installed) to excessive heat such as
sunshine or fire.
8. Protect the power cable from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to Sonos qualified service personnel. Servicing is required when the
apparatus has been damaged in any way.
12. The Mains plug should be readily available to disconnect the equipment.
13. Connections between this device and external equipment must be made using a shielded
cable in order to maintain compliance with FCC radio frequency emission limits.
Warning: Sonos Move 2 meets IP56 water resistance levels. To reduce the risk of fire or
electric shock, don’t expose this apparatus to a soaking rainstorm.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
