Sonos Port User Manual (English)

To Next Page

Port

The versatile streaming component for your stereo or receiver.

Plug in the audio equipment you already own and listen out loud.

Stream everything you love using the Sonos app and AirPlay2.

Use line-in to connect your turntable, or play music straight from a friend’s phone on your stereo.

12V trigger automatically turns your amplifier on and off.

See Getting started when you’re ready to add Port to your Sonos system.

Controls and lights

Status light Indicates the product’s status. Learn more

If the light is distracting, you can turn it off in

your room’s settings.

Connector panel

Join button Press to connect during setup.

Ethernet ports (2) Use an Ethernet cable to connect to a router,

computer, or additional network device like a

network-attached storage (NAS) device.

LED indicators:

• Flashing Green (network activity)

• Yellow (link connection)

12 V trigger Use a stereo or 3.5 mm to 3.5 mm cable to wake

your third-party amplifier whenever Sonos starts

playing audio.

Note: Read the guide that came with your

amplifier for details on the use of 12V

trigger input.

Need help?

Do you have a question about the Sonos Port and is the answer not in the manual?

Sonos Port Specifications

General

AirPlay	Yes
Bluetooth	No
Wi-Fi standards	802.11b, 802.11g
Ethernet LAN data rates	10, 100 Mbit/s
Apple docking compatibility	Not supported
Product color	Black
AC input voltage	100-240 V
AC input frequency	50-60 Hz
Cables included	AC, RCA
Built-in processor	-
Mobile operating systems supported	iOS 11.4
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Total Harmonic Distortion (THD)	0.009 %