Sonos ZP100
1
The Sonos ZP100
• The ZP100 has a high-performance, built-in amplifier that can power large or small speakers, allowing you to enjoy
superior audio quality in every room.
• The ZP100 has a 4-port Ethernet switch to enable multiple direct connections to routers, computers, and
other Sonos components.
• The ZP100 has analog audio inputs with digital encoding so that music from an external audio source (such as a CD
player or portable MP3 player) can be connected to one Sonos component, and played by all the other Sonos players
in the system.
New to Sonos?
It takes just a few steps to get your Sonos system up and running. The steps below are fully explained in the Quick Start
Guide packaged with your ZP100 —
• Connect one Sonos component (BRIDGE, CONNECT:AMP, PLAY:3, PLAY:5, CONNECT, ZP100) to your broadband router us-
ing an Ethernet cable (supplied).
• Place other Sonos components in the rooms of your choice.
• Install the software and follow the prompts to add the Sonos components and set up access to your music files.
• Add a Sonos controller to your music system.
See "Your Home Network" on page 2 to make sure your home network is ready for Sonos, and then follow the instructions on
page 3. Once you’ve set up your music system, you can add additional Sonos components any time.
Adding to an existing Sonos system?
Sonos can be easily expanded room by room. If you are adding this ZP100 to an existing Sonos system, you can turn directly
to "Adding to an Existing Sonos System" on page 6.
To Next Page
Loading...
Need help?
General
