Sonus SBC 1000 Series

Need help?

Do you have a question about the Sonus SBC 1000 Series and is the answer not in the manual?

Summary

Configuring Sonus SBC 1000 and SBC 2000 Series

External Peer Side Configuration

Node Interfaces Configuration (External)

SIP and Media Configuration (External)

Covers SIP profiles, media profiles, and codec configurations for external PSTN connectivity.

Routing and Signaling Configuration (External)

Details Signaling Groups, Call Routing Tables, and Transformation Tables for external call flow.

Internal Side Configuration

Node Interfaces Configuration (Internal)

SIP and Media Configuration (Internal)

Covers SIP profiles, media profiles, and codec configurations for internal Lync connectivity.

Routing and Signaling Configuration (Internal)

Details Signaling Groups, Call Routing Tables, and Transformation Tables for internal call flow.

Lync Server 2013 Configuration

Lync 2013 Configuration Settings

Adding the SBC to the Lync Server

Process to add the SBC as a Gateway in Lync topology, including FQDN and IP configuration.

Defining Trunk Port and Protocol

Configuration of the trunk name, listening port, and SIP transport protocol for the SBC.

Adding the SBC to Lync Routing

Instructions on how to add the SBC to the Lync Server's voice routing configuration.

SBC and Lync 2013 Specific Configurations

Initial Setup for All Calls

Calling Number Manipulation

Call Transfer Configuration

Call Hold Configuration

Media System Configuration

Exceptions