Installing the Sonus SBC 1000 Chassis
QUICK INSTALL: SONUS SBC 1000 SERIES
Before completing installation of the Sonus SBC 1000 chassis,
review the SBC “Chassis Mounting Space Requirements” page
in the online documenation:
https://support.sonus.net/x/LwWB
WARNING: to avoid overheating the unit, do not block the
air vents on either side of the system.
1
Unpack the shipping container and verify that the contents are complete and correct.
Make sure to read any bulletins or notices packed into the container and follow
the instructions they give.
2
a) Install the mounting tabs on the chassis.
b) Install the chassis in a 19” rack.
To Next Page
