Sony AC-V30 - Note on Use; Charging Guidelines; General Precautions

To Operate Video Equipment See illustration B .
Use the supplied connecting cord.
1 Connect the power cord to a wall outlet.
2 Insert the plug of the connecting cord to the DC
OUT jack.
3 Install the other side of the connecting cord to the
video equipment to be used.
Align the flt> marks, then while pressing the battery
pack, slide the plate to the right.
Note
Video equipment cannot be operated during the
charging.
«
Specifications
Power consumption For the model available in USA
and Canada: 20 W
For the model available in Japan:
26 VA-37 VA
Power requirements 100 - 240 V AC*, 50/60 Hz
Output voltage DC OUT: 7.5 V, 1.6 A in
operating mode
Battery charge terminal: 10 V,
1.3 A in charge mode
Application Sony battery pack NP-55 or NP-77
Operating temperature
0°C to 40°C (32°F to 104°F)
Storage temperature -20°C to 60°C (-4°F to 140 F)
Dimensions Approx. 67 x 39 x 138 mm (w/h/d)
t?3/i x 11 ** 5 V 2 inches)
including projecting parts and
controls
Weight Approx. 310 g (11 oz)
Supplied accessories
AC Plug adaptor (1)**
Connecting cord (1)
Use the supplied AC plug adaptor, if necessary,
depending on the design of the wall outlet.
Wall outlet
AC-V30
1 —
IP— ► '
0
Supplied plug adaptor
Design and specifications are subject to change
without notice.
* Canadian Standard Association (CSA) certifies 120 V AC
»* AnAC plug adaptor is not supplied with the Canadian
model.
9