Sony AC-V30 User Manual

AC Power Adaptor
AC-V30
Operating Instructions page 4
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the
bottom of the unit.
Record the serial number in the space provided
below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. AC-V30 Serial No_
Mode d’emploi page 10
Avant la mise en service de I’appareil, lire
attentivement ce mode d'emploi et le conserver pour
toute reference future.
Manual de instrucciones pagina 16
Antes de emplear la unidad, lea este manual
detenidamente y cons^rvelo para futuras referencias.
©1988 by Sony Corporation
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
A This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage" within the product s
enclosure that may be of sufficient magnitude to consti¬
tute a risk of electric shock to persons.
A This symbol is intended to alert the user to the presence
of important operating and maintenance (servicing) in¬
structions in the literature accompanying the appliance
INFORMATION
This equipment generates and uses radio frequency
energy and if not installed and used properly, that is,
in strict accordance with the manufacturer's
instructions, may cause interference to radio and
television reception. It has been type tested and-found
to comply with the limits for a Class B computing
device in accordance with the specifications in
Subpart J of Part 15 of FCC Rules, which are designed
to provide reasonable protection against such
interference in a residential installation. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient the receiving antenna
Relocate the equipment with respect to the receiver
Move the equipment awav from the receiver
Plug the equipment into a different outlet so that
equipment and receiver are on different branch
circuits.
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet
prepared by the Federal Communications Commission
helpful:
“How to Identify and Resolve Radio-TV Interference
Problems”. This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402,
Stock No. 004-000-00345-4.
For the Customers in Canada
THIS APPARATUS COMPLIES WITH THE CLASS B
LIMITS FOR RADIO NOISE EMISSIONS SET OUT IN

Sony AC-V30 Specifications

Summary

Operating Instructions

Owner's Record

Record model and serial numbers for dealer reference and product identification.

Safety Warning

Crucial safety advice to prevent fire or shock hazard by keeping the unit dry.

Information

Radio Frequency Interference

Details FCC compliance and user guidance for resolving radio/TV interference issues.

AC Power Adaptor Usage

Product Capabilities and Models

Explains how the AC-V30 is used for charging and powering equipment, and its plug types.

USA/Canada Safety Caution

Specific safety warning for polarized plugs in USA and Canada regarding outlet compatibility.

Note on Use

Charging Guidelines

Best practices for charging batteries, including temperature and duration for efficiency.

General Precautions

Important points on handling, storage, avoiding interference, and keeping contacts clean.

To Charge the Battery Pack

Charging Procedure

Step-by-step guide to connect the power cord and install the battery pack for charging.

Charge Lamp Troubleshooting

Diagnosing charging issues based on the charge lamp's behavior (flashing vs. lighting).

To Operate Video Equipment

Operation Procedure

Steps to connect the power cord and connecting cord for video equipment operation.

Specifications

Technical Details

Lists power consumption, voltage, operating/storage temperatures, dimensions, and accessories.