Why does my Sony BRAVIA KDL-40XBR4 have no color or a dark picture?
If your Sony LCD TV has no color, a dark picture, incorrect color, or the picture is too bright, press PICTURE to select the desired Picture Mode. Adjust the Picture Mode options in the Picture settings. If you set Power Saving to Low or High, it will enhance the black level.
How do I reset my Sony BRAVIA KDL-40XBR4 LCD TV to factory settings?
To perform a factory reset on your Sony LCD TV, turn on the TV. While holding down V on the remote control, press POWER. The TV will turn itself off, then back on again. Release V. Note that this will clear all customized settings, including the Parental Lock setting.
Why my Sony BRAVIA KDL-40XBR4 LCD TV cannot receive any channels?
If your Sony LCD TV isn't receiving any channels, ensure the power cord is securely connected and the TV is powered on. Check the antenna or cable connections and verify that the Cable setting is correct for your TV signal source.
What to do if there is no picture from some video sources on Sony BRAVIA KDL-40XBR4?
If your Sony LCD TV displays no picture from some video sources, check the connections between the external video equipment and the TV. Press INPUT on the remote control or press HOME and select your desired input from the External Inputs list.
Why does my Sony BRAVIA KDL-40XBR4 have good picture but no sound?
If your Sony LCD TV has good picture but no sound, check the volume control and make sure muting is off by pressing MUTING or VOL +. Disconnect any headphones and ensure the Speakers are set to TV Speakers in the Audio Options. Note that when using HDMI input with Super Audio CD or DVD-Audio, DIGITAL OUT (Optical) may not provide an audio signal.
How to reset lost password on Sony BRAVIA KDL-40XBR4?
To reset a lost password on your Sony LCD TV, select the Password settings on the Parental Lock settings, then enter the following master password: 4357. This will clear your previous password and allow you to enter a new one.
Why do certain programs on DVD display a loss of detail on my Sony LCD TV?
This issue with your Sony LCD TV is due to digital compression of the source content used by certain digital broadcasts and DVDs which may cause your TV’s screen to display less detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear on your screen. These signal compressions are more visible and are dependent on the clarity and resolution of the television.
How to reduce delay when playing video games on Sony LCD TV?
To reduce delay when playing video games on your Sony LCD TV, set the Game/Text Mode to ON.
How to remove dotted lines or stripes on Sony BRAVIA KDL-40XBR4?
To eliminate dotted lines or stripes on your Sony LCD TV, keep the TV away from noise sources like cars, motorcycles, or hair-dryers. If using the 300-ohm twin lead, move the excess lead away from the TV or try using a 75-ohm coaxial cable instead.
How to fix double images or ghosts on Sony BRAVIA KDL-40XBR4?
To fix double images or ghosts on your Sony LCD TV, check the antenna and cable connections. Also, check the antenna location and direction.
Section for recording TV model/serial numbers and customer support contact details.
Provides critical warnings and cautions regarding electrical safety, fire risk, and proper usage.
Covers AC power cord, wall outlet, wiring, electric shock, lightning, usage, overloading, and optional equipment precautions.
Safety precautions for outdoor antenna installation and grounding according to electrical codes.
Guidelines for safely cleaning the TV's AC power plug, screen, and cabinet.
Safety requirements for TV ventilation, placement, and installation to prevent overheating and hazards.
Safety measures for handling broken parts, liquid crystal leakage, and servicing procedures.
Explains how to experience full HD detail and the importance of signal quality for BRAVIA TVs.
Details picture quality differences and aspect ratios (16:9 vs 4:3) for HDTV and standard TV signals.
Introduces the XMB (Xross Media Bar) as the TV's main menu for features and settings.
Provides instructions and safety tips for installing the TV, including preventing it from toppling.
Details the steps and precautions for removing the TV stand to prepare for wall-mounting.
Identifies and describes the headphone jack, VIDEO IN 2, and HDMI IN 2 ports on the TV's left side.
Identifies and describes the rear panel ports including PC IN, HDMI IN, Component, and audio outputs.
Provides detailed explanations for rear panel ports including HDMI, Component, and digital audio connections.
Guides on connecting cable systems or VHF/UHF antennas for optimal signal reception.
Details connecting HD cable or satellite boxes using HDMI or component video inputs.
Illustrates and explains DVI and Component video connection methods for high-definition sources.
Guides on connecting a PC to the TV and configuring display signals using the PC Input Signal Reference Chart.
Illustrates connections for various external devices like VCRs, game consoles, and computers to the TV.
Details how to use HDMI Control for communication between Sony TV and equipment for BRAVIA Theatre Sync.
Provides a visual guide on how to bundle and manage connecting cables for a tidy setup.
Walks through the initial setup process, including language selection and automatic channel scanning.
Explains how to add digital channels and adjust picture aspect ratio settings.
Step-by-step guide for inserting AA batteries into the TV remote control.
Details the functions of basic remote control buttons for TV operation and setup.
Explains advanced remote control functions like Freeze, Closed Captions, DMex, Sound, Favorites, and Return.
Details buttons for controlling external media devices, audio settings, recording, power, and sleep functions.
Explains how to use the Jump button for channel switching and the Wide Mode for adjusting screen aspect ratio.
Details buttons for picture settings, input selection, menu navigation, and component control.
Describes the function and status indication of the TV's front panel LEDs.
Explains that the remote is pre-programmed for Sony brand video equipment.
Provides step-by-step instructions for programming the remote control to operate non-Sony video equipment.
Lists manufacturer codes required for programming the remote control to operate various audio-visual equipment.
Details how to use the remote control for operating cable boxes and satellite receivers.
Explains how to use the remote control for VCR and DVD player operations.
Guides on operating AV receivers and DVRs using the TV's remote control.
Details advanced remote functions like playback, navigation, and menu access for connected equipment.
Instructions on how to display and manage sub-windows for P&P and PIP viewing modes.
Guides on changing inputs/channels within windows and adjusting window sizes for P&P.
Explains how to use the HOME button to access the TV Home Menu and its main categories.
Provides a step-by-step guide on navigating the XMB menu using the remote control buttons.
Information on accessing product support and viewing signal diagnostics for the TV.
Details how to set the current time, program timers, and configure the sleep timer for automatic shutdown.
Describes the available Picture Modes (Vivid, Standard, Cinema, Photo, Custom) for adjusting image appearance.
Explains various picture adjustment options including backlight, contrast, color, sharpness, and noise reduction.
Details advanced picture settings like Black Corrector, Gamma, Color Space, and White Balance for fine-tuning.
Explains various sound settings including Sound Modes, Treble, Bass, Balance, Surround, and Voice Zoom.
Covers Wide Mode options and Auto Wide for adjusting screen aspect ratio based on content.
Details settings for adjusting display area, screen position, and vertical size for optimal viewing.
Provides screen adjustment options specifically for PC input signals, including Auto Adjust and centering.
Explains video settings that enhance motion, color, and overall picture quality.
Details settings for audio output options, speaker selection, and MTS stereo/SAP reception.
Guides on configuring cable settings, performing auto program, and adding digital channels.
Explains how to show/hide channels and assign custom labels to channels for easier navigation.
Provides options for displaying and customizing closed captions for analog and digital broadcasts.
Guides on setting up passwords and parental locks to block programs based on ratings or content.
Explains country-specific rating systems (USA/Canada) and digital rating options for content blocking.
Details how to block channels and provides comprehensive rating charts for USA and Canada.
Guides on labeling external inputs and configuring HDMI Control settings for connected equipment.
Details general settings like language selection, info banner display, and power saving options.
Explains settings for automatic brightness control, PC power management, and logo illumination.
Instructions on how to re-run the initial setup process for scanning channels or reconfiguring settings.
Provides guidance on regularly cleaning the TV's ventilation holes to ensure proper operation.
Offers solutions for common TV problems such as no picture, channel reception issues, and automatic power off.
Provides solutions for troubleshooting common picture quality problems like poor image, snow, and incorrect colors.
Offers troubleshooting steps for audio problems, PC input issues, and automatic Wide Mode changes.
Addresses issues with the remote control, lost passwords, and how to reset the TV to factory settings.
Provides detailed specifications for the TV model, system, channel coverage, panel, and speaker output.
Lists input/output jacks, power requirements, and power consumption details for the TV.
Details the accessories supplied with the TV and optional accessories that can be purchased.
To Next Page
General