Installing the Wall-Mount Bracket
To Customers
For product protection and safety reasons, Sony strongly recommends that wall-mounting of your TV
be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
Your KDL-40XBR4/KDL-40XBR5/KDL-46XBR4/KDL-46XBR5/KDL-52XBR4/KDL-52XBR5 can
be wall-mounted using the SU-WL500 Wall-Mount Bracket (sold separately). Please provide your
licensed contractor with this installation supplement as well as the Instructions (supplied with the SU-
WL500 Wall-Mount Bracket). Read these documents carefully for safety and proper installation.
To Sony Dealers and Contractors
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
KDL-40XBR4 KDL-40XBR5
KDL-46XBR4 KDL-46XBR5
KDL-52XBR4 KDL-52XBR5
Printed in Mexico
3-214-430-11(1)
© 2007 Sony Corporation
Screw and Hook locations diagram/table
Model Name Screw location Hook location
KDL-40XBR4 e, g b
KDL-46XBR4 e, g b
KDL-52XBR4 d, g a
KDL-40XBR5 e, g b
KDL-46XBR5 e, g b
KDL-52XBR5 d, g a
* Hook position “c” cannot be used for the models in the table above.
Screw location
When installing the Mounting Hook on the TV.
Hook location
When installing the TV onto the Base Bracket.
h
j
g
f
e
d
h
j
g
f
e
d
h
j
g
f
e
d
a
b
c*
To Next Page
Need help?
General