Using the Menus
30
Using the PC
Settings
When a PC is connected to the TV
and the PC input is selected, the
PC
Settings
screen appears instead of
the
Screen settings.
Also you can select the
PIP feature
which allows you to view two
pictures simultaneously from
TOOLS button (see page 25).
Screen
PC Settings
PC
Wide Mode
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Power Management
Normal
0
0
0
0
On
Option Description
Wide Mode Normal Select to display in the original image size.
Full1 Select to enlarge the picture to fill the display area, keeping its original
aspect ratio.
Full2 Select to enlarge the picture to fill the display area.
Auto Adjustment Select to automatically adjust the display position and phase of the picture when the TV
receives an input signal from the connected PC. Note that Auto Adjustment may not work
well with certain input signals. In such cases, manually adjust the options below.
Phase Adjust after Pitch to fine tune overall sharpness.
Pitch Adjust uneven sharpness on screen.
For the PC Input Signal Reference Chart, see page 41.
Horizontal Center Allows you to move the position of the picture left and right.
Vertical Center Allows you to move the position of the picture up and down.
Power Management On Select to automatically switch to the power saving mode when there is
no signal input for 30 seconds.
Off Select to turn off Power Management.
Power Management is not VESA-compliant.
To Next Page
Loading...
Need help?
General