What to do if my Sony TV is frozen and not responding?
If your Sony TV is frozen, showing a blank screen, not responding to the remote, or the buttons on the TV itself, try this: Unplug the AC power cord (mains lead) from the TV for two minutes, and then plug it back in. This performs a simple reset.
Why is my Sony TV remote control not working?
If the remote control for your Sony TV isn't working, first replace the batteries. Also, check if your TV is in SYNC mode. If it is, press the SYNC MENU button, select [TV Control], and then choose either [Home (Menu)] or [Options] to regain control of the TV.
How to connect Sony Bravia KDL-60W600B TV to Wi-Fi without WPS?
If your Sony TV cannot connect to a wireless router using WPS and you are using WEP security, select [Easy] - [Wi-Fi] - Connect by scan list. Then, select the network name (SSID) you want to connect.
How to fix Sony Bravia KDL-60W600B when the illumination LED is flashing red?
If the illumination LED on your Sony TV is flashing red, try resetting the TV. Disconnect the AC power cord (mains lead) from the TV for two minutes, then turn the TV back on. If the issue persists, contact your dealer or a Sony service center, noting how many times the LED flashes red.
Why does my Sony Bravia KDL-60W600B have no picture or sound?
If you have no picture and no sound on your Sony TV, check the antenna (aerial)/cable connection. Also, ensure the TV is connected to AC power (mains) and press the power button (?/?) on the TV or remote control.
How to turn off the illumination LED on a Sony TV?
If you do not want the illumination LED to light up on your Sony TV, you can turn it off. Press the HOME button, then navigate to [Settings] - [System Settings] - [General Set-up] - [Illumination LED] and select [Off]. Alternatively, you can press the OPTIONS button, then select [Illumination LED] - [Off].
What to do if Sony Bravia KDL-60W600B TV cannot find the required network name?
If you cannot find the required network name during the network setup on your Sony TV, select [[Manual Entry]] and press the enter button to manually enter the network name.
Why some programmes cannot be tuned on my Sony Bravia KDL-60W600B?
If some programmes cannot be tuned on your Sony TV, check the antenna (aerial) connection.
What to do if I forgot the Parental Lock password on my Sony TV?
If you've forgotten the Parental Lock password on your Sony TV, enter 9999 as the PIN code. This PIN code is always accepted.
Why does my Sony Bravia KDL-60W600B get warm?
When a Sony TV is used for a long time, the TV's surroundings may become warm to the touch.
General| Screen Size | 60 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LED |
| Refresh Rate | 60Hz |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Wi-Fi | Yes |
| Smart TV | Yes |
| Motionflow XR | 240 |
| 3D Capable | No |
Crucial safety advice on TV placement and anchoring to prevent falls and injuries.
General safety precautions and warnings for TV operation.
Warning about battery exposure to excessive heat such as sunshine or fire.
Guidance on installing and using the TV to avoid risks of fire, electrical shock, or injury.
Precautions for cleaning the TV screen and cabinet to avoid damage.
Recommendation for professional installation by Sony dealers or licensed contractors.
Steps to reset the TV when the illumination LED flashes red.
Checks for antenna connection and power for no picture or sound issues.
List and description of available input and output connection ports.
To Next Page