Sony BRAVIA XR X93L User Manual

4/19/23, 2:09 PM
Help Guide
https://helpguide.sony.net/tv/kusltn1/v1/en-003/print.html
11/146
Terminal Description
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.
Note
When connecting the cable to the Cable/Antenna input,
finger tighten only, over tightening the connection can
damage the TV.
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.
CENTER SPEAKER IN
To use your TV speakers as the center speaker, connect the
output of your AV receiver to the CENTER SPEAKER IN on your
TV.
To use your TV speakers as the center speaker, press the
(Quick Settings) button on the remote control, then select
[Settings] — [Display & Sound] — [Audio output] — [Speakers] —
[Audio system].
Note
Before connecting cables, disconnect the AC power cord
(mains lead) of both the TV and AV receiver.
If you do not use the CENTER SPEAKER IN terminal or the
S-CENTER SPEAKER IN input, change the following setting
to prevent noise from the speakers.
Press the (Quick Settings) button on the remote control,
and disable [TV center speaker mode] in [Settings] —
[Display & Sound] — [Audio output].

Sony BRAVIA XR X93L Specifications

General

Series	BRAVIA XR
Model	X93L
Display Type	LED
Backlight Type	Full Array LED
Resolution	4K Ultra HD (3840 x 2160)
Processor	Cognitive Processor XR
Operating System	Google TV
HDR Support	Dolby Vision, HDR10, HLG
HDMI Ports	4
USB Ports	2
Refresh Rate	120Hz
Variable Refresh Rate (VRR)	Yes
Auto Low Latency Mode (ALLM)	Yes
Built-in Wi-Fi	Yes
Bluetooth	Yes
Voice Control	Google Assistant
Screen Size	65 inches
Weight (Without Stand)	Varies by screen size