Sony BRAVIA XR X93L User Manual

4/19/23, 2:09 PM
Help Guide
https://helpguide.sony.net/tv/kusltn1/v1/en-003/print.html
12/146
Terminal Description
S-CENTER SPEAKER IN
Connects the TV and an audio device with an S-CENTER OUT
output/jack using a TV center speaker mode cable. Before
connecting, make sure you unplug the AC power cord (mains
lead) of the TV and audio device to be connected.
For details, refer to Using the TV as a center speaker (only
models with TV center speaker mode).
Note
If you do not use the CENTER SPEAKER IN terminal or the
S-CENTER SPEAKER IN input, you will need to perform the
following steps to prevent noise from the speakers.
Press the (Quick Settings) button on the remote control,
and disable [TV center speaker mode] in [Settings] —
[Display & Sound] — [Audio output].
[4] Getting Started
How the LEDs light up
You can check the status of the TV by looking at how the LEDs light up.
The location of the LEDs varies by model.

Sony BRAVIA XR X93L Specifications

General

Series	BRAVIA XR
Model	X93L
Display Type	LED
Backlight Type	Full Array LED
Resolution	4K Ultra HD (3840 x 2160)
Processor	Cognitive Processor XR
Operating System	Google TV
HDR Support	Dolby Vision, HDR10, HLG
HDMI Ports	4
USB Ports	2
Refresh Rate	120Hz
Variable Refresh Rate (VRR)	Yes
Auto Low Latency Mode (ALLM)	Yes
Built-in Wi-Fi	Yes
Bluetooth	Yes
Voice Control	Google Assistant
Screen Size	65 inches
Weight (Without Stand)	Varies by screen size